---

Product Description

Marshall 100 watt all valve 2 channel combo amplifier - JVM210C. If it's gain you're after then look no further. If it's also clean you're after then this does it too. It will produce any sound from the cleanest country to hi----gain distortion. It will do this in a very user friendly manner by switching between 2 channels both of which contain their own gain structure. Not only that but each channel has independently controlled digital reverb. This is an all valve amp with 5 x 12AX7 input valves and 4 x EL34 output valves. To further control the gain there are independent master volumes on eacxh channel. As iff all this wasn't enough there are 2 FX loops one series and one parallel, a Speaker emulated XLR output, a 4-way footswitch (with memory) supplied with the amp and all switching can be done via MIDI. The amp is fitted with 1 x 12" Heritage and 1 x 12" Vintage speakers for the very best of both worlds.


Specification
The Marshall JVM210C all-tube 2 x 12" 100-watt amplifier brings you the full range of Marshall tone, from crisp clean to molten roar! The 2-channel JVM210C gives you six "modes," covering two independent channels with three gain stages, each with its own footswitchable memory. It's a great feature for ultra-flexible onstage switching (via the included dedicated, programmable footswitch unit), plus the combination of a "vintage" and "modern" speakers provides great tone. Two effects loops, reverb for each channel, a speaker-emulated XLR line out, and two footswitchable master volumes also grace the JVM205C. Key Features of the Marshall JVM210C 100-watt 2 x 12" Tube Amplifier Combo

• All-tube design: 5 x12AX7, 2 x EL34 (50-watt) or 4 x EL34 (100-watt)
• Two totally independent, footswitchable channels - clean/crunch and overdrive
• Each channel has three footswitchable modes - Green, Orange, and Red
• Each Mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
• Footswitchable, studio-quality digital reverb
• Independent reverb controls for both channels
• Two footswitchable master volumes
• Two effects loops - one series, and one parallel/series
• Parallel/series effects loop is footswitchable on/off
• Speaker-emulated XLR line out
• Programmable 4-way, 5-LED footswitch with memory capabilities
• All switching can be done via MIDI
• MIDI in and MIDI thru jacks on rear panel
• Celestion speakers in combos
• Made in England
• All switching can be done via MIDI