---

Product Description

Orange TV50H Thunderverb guitar amp head. This head can be used for bass guitar and guitar due to a low frequency respons of 30Hz. It features two channels offering the full palette of sounds from very clean to hard rock distortion. The Accutronics 3 spring reverb and the effects loop are valve driven. It has 4 x 12AX7 preamp valves and 4 x 6V6/6550 output valves.This could well be the answer if you are really in need of a 50 watts head that will really sing. If you're a bass player and a guitarist it could be a no brainer. We recommend you run this with a PPC412 4x12 cab to get the maximum tone.



Specification
The Orange TV50H Thunderverb 50H all valve with 4 ECC83/12AX7 preamp valves 4 6V6/6550 output valves Class AB 50-watts RMS head amplifier features Orange's Extended Tone Range technology, a combination of valve circuitry and a massive output transformer extending the low end frequency response to 30Hz. The extended bass bandwidth means the Thunderverb 50H sounds incredible when used for bass guitars as well as electrics.

The Orange Thunderverb 50H contains 2-Channels, a 2-stage Channel B clean and 4-stage Channel A dirty lead channel. Channel A offers Gain, Volume and Treble, Middle, Bass EQ for max tonal variations. Channel B replaces the 3-band EQ with an interacetive Shape control which reduces mid frequencies while increasing bass and trebles. an Attenuator output level control allows cranked overdriven tones at lower volume levels. A valve driven and valve returned, with 2x ECC81 valves, Accutronics 3 spring reverb adds sparkle and chime to your guitar tone. And valve driven effects loop. Full function footswitchable, change channel, Reverb in and out, Attenuator on or off.

Drive an Orange PPC412HP-8 400-watt guitar cab for awsome power, or an Orange PPC412 cab.

ORANGE TV50H THUNDERVERB 50H VALVE HEAD AMP FEATURES
2- Channel valve amplifier designed for both electric guitar and bass guitar.
2-Stage Clean and 4-Stage Lead with interactive Hi/Lo or 3-band EQ.
F8 output transformer for extended bass frequency response.
Power: 50-Watts RMS into 4/8 ohms, 25-Watts RMS into 8/16 ohms.
Preamp Valves: ECC83 / 12AX7.
Power Valves: 6550.
Channel Configuration: Channel A and Channel B.
Channel A Controls: Gain / Bass / Middle / Treble / Volume.
Channel B Controls: Gain / Shape / Volume.
Shared Controls: Attenuator / Reverb
Footswitch Function: Channels / Attenuator / Reverb.
Valve driven FX Loop.
Valve driven and valve returned Accutronics Spring Reverb for both channels, footswitchable.
Reverb Valves: ECC81 / 12AT7.
Serial Number: 1001.
Loudspeaker Outputs: 1x 16 Ohm, 2x 8 Ohm.
Dimensions: 550 x 240 x 280 mm.