Product Description
Wharfedale Titan 12 Passive PA Speaker cabinet. Fitted with a 12" speaker and horn. rated at 8 ohms and handles Continuous RMS 250 , Program 500 and
Peak 1000 watts.
Wharfedale Titan is an ultra light range of passive and active speakers that look and sound expensive. Built from the very best components including titanium compression drivers and heavy-duty cast-frame woofers they are suitable for installation or mobile use. The Titan passive speaker's composite Molded Polypropylene cabinets are moisture proof so a great choice for use outside. Suitable for all applications.
SpecificationTitan 12
Wharfedale Pro Titan 12 series with 12/2inch voice coil LF components and 44mm Titanium Diaphragm true Compression Driver and the integrated 90x60 Waveguide horn to achieve a clean volume dispersion with wide, even reflection of the high frequency. The cabinets of the Titan series are made of extremely resonance proof High Density Polyethylene structural foam finished. This material gives a lightweight and very robust enclosure.
The system can be arrayed for additional coverage and SPL requirements. The elliptical waveguide HF section provides consistent coverage over its specified range for low feedback in open mic applications and improved array smoothness, whether applied to a reverberant or dry club type acoustic environment The Titan 12 integrates successfully with the room for superior sound quality with a minimum of equalization and tuning.
For permanent sound installations, architectural compatibility of primary importance, mounting points become critical. Titan 12 series threaded points (Three on top, four on bottom, and three on each side for horizontal rigging) set a standard with Omnimount footprint on bottom.
SPECIFICATIONS
MODEL TITAN 12 PASSIVE
GENERAL INFO
System type 12inch 2-way passive
Frequency response +/- 3db 55-20kHz
Sensitivity (db 1w 1m) 98dB
System impedance 8 ohms
Maximum SPL Peak dB 128dB
POWER HANDLING (Watts)
Continuous RMS 250
Program 500
Peak 1000
LF DRIVER
Lf driver size mm / inches 1x12inch
Lf voice coil size 64.26mm/2.5inch
HF SECTION
Hf voice coil size 44mm/1.75inch
Hf exit size mm / inches 25mm/1inch
Hf type Compression Driver
Hf diaphragm material Titanium
Horn dispersion (H x V) 90 x 60
Hf horn shape EWG - Elliptical Waveguide
Hf peak indicator Peak LED ring in horn throat
CROSSOVER SECTION Type: 2-way
Crossover Frequency / Filter 2.4 kHz / Linkwitz-Riley
Hf driver protection DTF — Dynamic Thermal Filament
Hf EQ (Boost / Flat) 3dB boost (long-throw) / Flat (near-field)
CONNECTORS
IN / OUT PANEL (speaker Level)
Input connector 2 x 1/4inch jacks and2 x Speakon
PHYSICAL FEATURES
Enclosure type Molded Polypropylene
Enclosure shape Trapezoidal for vertical array and horizontal stage monitor applications
Finish Black or White
Handle quantity 2 carry handles (one on each side)
Suspension points (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount 60.0-type footprint
Stand adapter - BOTTOM Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket
Stand adapter - TOP Optional dual-unit array speaker stand hardware
DIMENSIONS and WEIGHT
Height ( mm / ins ) 556mm/21.88inch
Width Front / Rear / mm / ins 384mm/15.1inch / 180mm/7.1inch
Depth ( mm / ins ) 312mm/12.3inch
Net weight ( kg / lbs ) 12kg/26.4lbs
Gross weight ( kg / lbs ) 14kg/30.8lbs
